Luxmeter GM1010

GM1010 is an affordable digital light intensity meter, which you can use especially when checking the lighting of living rooms, or to determine the intensity of workbench lighting, the light intensity of luminaires, etc.

It has simple operation - you set the device perpendicular to the direction of the light and on the clear display you can immediately see its current intensity in units of Lux or Fc. For longer-term measurements, there is a thread on the bottom for placing on a tripod.

• large clear display with backlight (switches on and off with a short press of the off button)
• four measurement modes (change by holding the MAX button for 3s, then selecting a mode and holding the MAX button again for 3s):
  • HOLD - holding the measured value on the display
  • MIN - holding the lowest measured value on the display)
  • MAX - holding the lowest measured value on the display)
  • ∆ - display the difference value
• range: 0 - 200 Lux; 0 - 185.806Fc
• accuracy: for intensity <10,000Lux ±3%rdg±0.5%fs; for intensity >10,000Lux ±4%rdg±10dgts.
• Measurement frequency: 2x in 1s
• Lux/Fc units (change by pressing both buttons simultaneously)
• battery life: 18 hours with continuous measurement
• Operating temperature: 0~40ºC at; 10%~90% humidity
• storage temperature: -20 ~ 50 ºC at; 10% ~ 90% humidity
• battery charge status indication
• power supply: 9V alkaline battery (not included)
• automatic shutdown: after 5 minutes
• Dimensions: 52 x 36 x 166mm
• English manual